|
|
Safety lamp Charger:
GWB-15 Portable Charger
KCLA-102 series charge rack
ZLCD-34 charge module to reborn the old rack
|
GWB-15 Portable Charger
Product this give
Model KL8M high energy unit type lithium electric miner's lamp
charge and spend specially, it is for helping the staff members of
factories and mines enter the special requirement that the well
checks up the work at any time too, simplifying charging requiring
but is designed of the individual miner's lamp, it has a advantage
such as being small, light, carries and convenient.
Major Technical Specifications:
1. Input the voltage: AC 220V 賊25%
2. Output the voltage: DC 4.20 賊0.05V
3. Export the constant current: 1500 賊150mAs
4. size: 125x55x80mm
5. weight: 0.35kg |
top
KCLA-102 series charge rack
|
KCLA series rack of Lithium battery
mineral lamp is applied the most modern electron technology, made
from technical parts, specially made for mass recharge for the
lithium ion battery mineral lamp of number KL8M. This rack
precisely make sure to meet the voltage, current when recharging,
though the voltage and current is different from each lamp when
recharging. When the battery is reach one stable rating then is will
go into constant rating. This constant rating makes the lamp
in the perfect recharge effect. This rack is the most advanced
technology, the best product to recharge for the li-Ion battery
mineral lamp at this moment.
Features:
1. Recharge control with each lamp by voltage and current
sampling, and compare with the voltage,
switch intelligently, automatically recover short circuit.
2. Recharge sampling is to the individual lamp, won't make the cross
sampling, the sampling data is made sure to one lamp only.
3. Short time recharge efficiently. There's little heat come into
being and few energy lost during the recharge, it makes the life of
the lamp longer.
4. With automatically sampling data, it makes sure every lamp only
when reach a stable rating then into constant current, constant
voltage switch automatically. This way make the lamp in perfect
efficient of the recharge.
5. Easy control, automatically operating, you can recharge it
without tender by people, draw rein in the maintain fee.
6. You can arrange the input voltage in a wide range. Any move of
this voltage during the arrangement will no affect in it.
7. Size: 1860x1730x350mm, 155kg. |
| Number |
Input Voltage (V) |
Output Voltage (V) |
Output Current (A) |
output Power (W) |
Recharge Capacity (PCS) |
| KCLA-102 |
220V?5% |
4.25V?.05 |
200 |
850 |
102 |
| KCLA-60 |
220V?5% |
4.25V?.05 |
120 |
510 |
60 |
| KCLA-36 |
220V?5% |
4.25V?.05 |
72 |
306 |
36 |
| KCLA-12 |
220V?5% |
4.25V?.05 |
24 |
102 |
12 |
top
ZLCD-34 charge module to reborn the old rack:
Product profile:
To decrease the cost and save the fund of the mine, we specially do the research on the Li-ion battery miner's lamp charge module. This module is put on the old style charger rack. You only need to remove the old circuit and replacing our charger module. After changing this charger rack, it can charge li-ion battery miner's lamp. One standard charge module can recharge for 34 unit lamp. We can make different units charge module accord to your requirements. If you want to recharge more or less units' lamps, you can use more or less units' modules. Thus, the mine can save much money to solve the problem of mass recharge.
Product features:
1. Use the input voltage of the common voltage. (we can adjust the voltage
by the different standard by different countries)
2. Output voltage can be automatically constant current without any effect
by the move of the change of the voltage.
3. Each point of charge is individual working, each module charge one
battery only to make sure the li-ion in the perfect situation of charging.
4. The module has no automatically discharge design, when stop inputting the
power, the lamp won't discharge. So no need to have people to watch out when
recharging.
Technology index:
1. Input voltage: 220V 賊25%, 1.5A 賊10%
2. Output voltage: DC4.2V 賊0.05V
3. Working style: continuously
4. Size: 1360x130x90mm, 9.5kg
the construct inside of ZLCD-34
recharge model
top
|
